Ultimate Technology 500 POS manual Msr

Table 2. Local Mode Programming Function Codes and Default Settings

1 1	MSR	Channel	1,3	Field	^ (5Eh) for	Used to send a field separator between
	Separator				format 1	fields of the magnetic card chann e l .
					= (3Dh) for
					format 3
1 2	MSR Channel 1,3 Suffix				?<CR>	Used to send suffixes after the
					(3Fh,0Dh)	magnetic card channels .
					for both
					format 1 and
					3
1 3	MSR	Channel	3	Account	: (3Ah) for	Used to send an account separator on
	Separator				format 3	the magnetic card channel .
1 4	MSR Channel 2 Prefix				; (3Bh) for	Used to send a prefix after the
					format 2	magnetic card channel .
1 5	MSR Channel 2 Field Separator				= (3Dh) for	Used to send a field separator between
					format 2	fields of the magnetic card channel .
1 6	MSR Channel 2 Suffix				?<CR>	Used to send a suffix after the
					(3Fh,0Dh)	magnetic card channel .
					for format 2
1 7	MSR Bad Read Track 1,3				M1!<CR>	Used to send a key sequence to the
					(4Dh,31h,21	host computer upon a bad magnetic
					h ,	card read .
					0Dh)
1 8	MSR Bad Read Track 2				M2!<CR>	Used to send a key sequence to the
					(4Dh,32h,21	host computer upon a bad magnetic
					h ,	card read .
					0Dh)
1 9	MSR Sending				Send any	Used to send MSR data if one or both
					track	tracks are good .
						0 = send any track; 1 = send if both
						tracks are good .
2 0	RS232 Port 0 Baud Rate				9 6 00 Baud	Used to select a baud rate for Port 0 .
					Rate	Baud rates available are: 300, 600,
						1200, 2400, 4800, 9600, 19200, 38400
						a n d 5 7 6 0 0 .
2 1	RS232 Port 0 Stop Bits				2 stop bits	Used to select number of stop bits, 1
						or 2, used with Port 0 .
22	RS232 Port 0 Parity				No parity	Used to select parity used with Port 0.
						Selections available are: no parity, odd
						parity or even parity.
23	RS232 Port 0 Handshaking				Both	Used to select method of handshaking used
						with Port 0. Selections available are: none,
						CTS/RTS, XON/XOFF or both.

13