Table 5. Remote Programming Mode Commands - Continued
OP | MNEMONIC/DESCRIPTION | COMMAND/ACKNOWLEDGEMENT | |
CODE |
|
|
|
(HEX) |
|
|
|
|
|
| |
B8 | MSRSND | COMMAND: B8x<CR> | |
| Use to send magnetic card reader | B8 | = Op Code |
| track data for any one good track or | x | A = send any good track |
| if both tracks are good. |
| B = send if both tracks are good |
|
| <CR> | = terminate command (0D hex) |
|
| ACKNOWLEDGEMENT: NONE | |
|
|
| |
B9 | CARDED | COMMAND: B9c<CR> | |
| Enables or disables tracks on | B9 | = Op Code |
| magnetic card reader. | c | = track selection |
|
| <CR> | = terminate command (0D hex) |
|
| Track selection: | |
|
| A | = track 1 on |
|
| B | = track 2 on |
|
| C | = track 3 on |
|
| D | = track 1 and 2 on |
|
| E | = track 2 and 3 on |
|
| F | = all tracks off |
|
| ACKNOWLEDGEMENT: NONE | |
|
|
|
|
48
