Table 3. Local Mode Programming Instructions - Continued
Note: *Default Settings
Function Code(s) | Operation | Normal Indication | Remarks | |
70 | 1. | While in programming mode, at Series 500 Keyboard numeric keypad, enter Function | ||
Indicator LED |
| Code 70. |
|
|
Mode (70) |
|
|
|
|
|
|
| LED (2) turns on. |
|
| 2. | At Series 500 Keyboard numeric keypad, enter the applicable number (0 or 1) to | ||
|
| select LED mode of operation. |
| |
|
|
| LED Mode |
|
|
|
| 0 = Command mode of operation* | |
|
|
| 1 = PC mode of operation |
|
|
|
| LED (2) turns off. |
|
| 3. | Program the next function code or exit programming mode by entering 99 on Series | ||
|
| 500 Keyboard numeric keypad or by swiping the Programmer's card. If using the | ||
|
| optional | ||
|
|
| ||
71 | 1. | While in programming mode, at Series 500 Keyboard numeric keypad, enter Function | ||
Enable/Disable |
| Code 71. |
|
|
Keyboard Key |
|
|
|
|
Clicks (71) |
|
| LED (2) turns on. |
|
2.At Series 500 Keyboard numeric keypad, enter the applicable number (0 or 1) to select key click mode of operation.
Key Click Mode
0 = off
1 = on*
LED (2) turns off.
3.Program the next function code or exit programming mode by entering 99 on Series 500 Keyboard numeric keypad or by swiping the Programmer's card. If using the optional
29