Ultimate Technology 500 POS manual 23 or

Table 3. Local Mode Programming Instructions - Continued

Note: *Default Settings

Function Code(s)	Operation		Normal Indication	Remarks
23 or 33	1.	While in programming mode, at Series 500 Keyboard numeric keypad, enter Function
Main Port 0 (23)		Code 23 (Port 0) or 33 (Port 1).
AUX Port 1 (33)
Handshaking			LED (2) turns on.
	2.	At Series 500 Keyboard numeric keypad, enter the applicable number (0, 1, 2 or 3) to
		select handshaking per list below.
			0 = None
			1 = CTS/RTS
			2 = XON/XOFF
			3 = Both*
			LED (2) turns off.
	3.	Program the next function code or exit programming mode by entering 99 on Series
		500 Keyboard numeric keypad or by swiping the Programmer's card. If using the
		optional 3-position keyswitch, move switch out of the AUX position.
24 or 34	1.	While in programming mode, at Series 500 Keyboard numeric keypad, enter Function
Main Port 0 (24)		Code 24 (Port 0) or 34 (Port 1).
AUX Port 1 (34)
Word Length			LED (2) turns on.
	2.	At Series 500 Keyboard numeric keypad, enter the applicable number (7 or 8) to
		select word length per list below.
			7 = 7 data bits
			8 = 8 data bits
			LED (2) turns off.
	3.	Program the next function code or exit programming mode by entering 99 on Series
		500 Keyboard numeric keypad or by swiping the Programmer's card. If using the
		optional 3-position keyswitch, move switch out of the AUX position.

25