Ultimate Technology 500 POS manual Select override secure mode of operation per list below

Table 3. Local Mode Programming Instructions - Continued

Note: *Default Settings

Function Code(s)	Operation	Normal Indication	Remarks
	on Series 500 Keyboard numeric keypad or by swiping the Programmer's
	card. If using the optional 3-position keyswitch, move switch out of the
	AUX position.
90	This is a command used to read out the Series 500 Keyboard system log data at the
Dump System Log	main port.	For detailed information about retrieving the system log data, refer to the
	Maintenance Section of this manual.
91	1. While in programming mode, at Series 500 Keyboard numeric keypad, enter Function
Main Port Select	Code 91.
		LED (2) turns on.

2.At Series 500 Keyboard numeric keypad, enter the applicable number (0 or 1) to select LED mode of operation per list below.

0 = Keyboard Port 0 is main

1 = RS232 Port 0 is main

LED (2) turns off.

3.Program the next function code or exit programming mode by entering 99 on Series 500 Keyboard numeric keypad or by swiping the Programmer's card. If using the optional 3-position keyswitch, move switch out of the AUX position.

		Note: Must re-power Series 500 Keyboard in order to activate function code.
96	1.	While in programming mode, at Series 500 Keyboard numeric keypad, enter Function
Set Secure Mode		Code 96
		LED (2) turns on.
	2.	At Series 500 Keyboard numeric keypad, enter the applicable number (0 or 1) to
		select override secure mode of operation per list below.
		0	= not secure
		1	= secure

LED (2) turns off.

3.Program the next function code or exit programming mode by entering 99 on Series 500 Keyboard numeric keypad or by swiping the Programmer's card. If using the optional 3-position keyswitch, move switch out of the AUX position.

31