CAUTION
Replacement of the battery may result in the need to reprogram the keyboard. For programming instructions, refer to the programming section of this manual.
1.Disconnect keyboard from system.
2.Turn keyboard over to gain access to 5 screws that secure the base of the keyboard case to the top. Remove the 5 screws.
3.Turn keyboard upright. Gain access to the battery by lifting the top portion of the keyboard assembly from the base and placing it and the attached extended cable/connectors in front of the base.
4.Remove existing battery.
5.Making sure to observe correct polarity, install a new
Panasonic, Part No.
Eveready, Part No.
Duracell, Part No.
6.Make sure that the cable/connectors are making good contact, then position the top of the keyboard assembly on the keyboard base. Turn the keyboard over and secure top of the keyboard to the base by installing the 5 screws.
7.Connect keyboard to system.
8.Dispose of the used battery in an environmentally safe manner. If necessary, the battery may be returned to the Ultimate Technology Corporation at the address shown below for proper disposal.
Ultimate Technology Corporation
100 Rawson Road
Victor, NY 14564
60