Ultimate Technology 500 POS manual Applicable Function Code 45, 46, 47 or

Table 3. Local Mode Programming Instructions - Continued

Note: *Default Settings

Function Code(s)	Operation		Normal Indication	Remarks
45	1.	While in programming mode, at the Series 500 Keyboard numeric keypad, enter
46		applicable Function Code 45, 46, 47 or 48.
47
48			LED (2) flashes.
Drawer 1
Open (45)	2.	At the auxiliary keyboard, press the desired key or type the desired key sequence.
Closed (46)		Note that the maximum number of key codes is limited to 24 - this is equivalent to
		approximately 12 key strokes.
Drawer 2
Open (47)				If the Series 500 Keyboard beeps and
Closed (48)				LED (2) turns off while entering key
				codes at the auxiliary keyboard, you
				have exceeded 24 key codes. Repeat
				steps 1 and 2.
	3.	At the Series 500 Keyboard, press ENTER.
			LED (2) turns off.
	4.	Program the next function code or exit programming mode by entering 99 on Series
		500 Keyboard numeric keypad or by swiping the Programmer's card. If using the
		optional 3-position keyswitch, move switch out of the AUX position.
49	1.	While in programming mode, at Series 500 Keyboard numeric keypad, enter Function
Poll/		Code 49.
Unsolicited
Cash Drawer Status			LED (2) turns on.
	2.	At Series 500 Keyboard numeric keypad, enter the applicable number (0 or 1) to
		select status method per list below.
			0 = Send on change or transition
			1 = Send only with poll command CDSTATUS
			LED (2) turns off.
	3.	Program the next function code or exit programming mode by entering 99 on Series
		500 Keyboard numeric keypad or by swiping the Programmer's card. If using the
		optional 3-position keyswitch, move switch out of the AUX position.

28