Installation | Average Temperature/Water Bottom Sensor and Converter |
|
|
4.2Unpacking
When unpacking, be careful not to bend, fold or twist the flexible tube. Please refer to the recommended procedure below.
Recommended procedure | Incorrect procedure |
|
|
4.3Flexible tube
When attaching and bending the flexible tube, the radius of curvature must be at least 300 mm (11.8") at any bend portion.
Flexible tube
Min.1m (39.37")
Figure 4-2: Flexible tube
Note! If a flexible tube is bent with a radius of curvature less than 300 mm (11.8"), the flex- ible tube or the measuring element may be seriously damaged or broken.
10 | Installation and Operations Manual |
