Varec 4532 manual Replacement, Gvh

Maintenance Average Temperature/Water Bottom Sensor and Converter

9.4Replacement

After a complete 4532 ATC electronic module has been replaced, the parameters must be manually re-entered to the replaced new module in order to maintain the proper operation. Measurement can continue without having to carry out a new setup.

The following matrix parameters should be confirmed after replacement of the electronics.

GVH	Contents
443	Level Data Selection
460-469	Element Position No. 1-9
470	(to select elements 10-15)
474	(to adjust position of element selected at GVH=470)
482	Total No. elements
485	Kind of Interval
486	Bottom point
487	Element Interval (If GVH=485 is "Equal")

46 Installation and Operations Manual