Varec 8315 Series manual ID DIP Switch SW1, LED Indicators D1-D6

8300 8315 L&J Tankway Interface Module

Figure 3-3: Model 8315 L&J Tankway Interface

ID DIP Switch (SW1)

LED indicators (D1 ￿ D6)

+48-65 VDC power fuse

(1 A 250V TR5) (F1)

External Power Connector

(+48 - 65 VDC) (J2)

Field wiring

terminal block (J3)

Surge/Shield

ground connector (J4)

Transmit Line Fuse

(63 mA 250V TR5) (F2)

3.2.1ID DIP Switch (SW1)

The ID DIP Switch is a binary switch that sets the unit ID number (1-4). This value is set to the port number on which the Model 8315 is installed (e.g. P1=1). The switch is set according to its location on the motherboard. Set to “1” for P1, “2” for P2, “3” for P3, and “4” for P4. Refer to the following figures:

Figure 3-4: ID DIP Switch settings

3.2.2LED Indicators (D1-D6)

The LED displays indicate the status of the Model 8315’s CPU and communications. The indicators are identified in the following figure.

•CPU: CPU activity

17