8300 | Using ViewRTU |
|
|
Displaying the Point Connections window.
•
Figure 6-39:Point Connections Window
Point Connections Window
This graphic display visually illustrates the reference connections of the focus point. From this display, the user is able to select reference points, create connections between these points, and enter configuration parameters.
The point icons located in the Icon Bar utilize the
The user is able to connect the output data of one point to the input of another point.
The connections are made through point references and links. Not all points have references, but any parameter of a point can be referenced. Some references are incompatible with some types of data. The program can determine if a reference is valid, but it cannot determine if the reference is meaningful.
The Input Data parameters, which are located on the left side of the software block, are references. The Output Data parameters, which are located on the right side, are most commonly referenced by other points.
To create a Connection:
•Select the desired point icon from the Icon Bar and drag it onto the desired data parameter.
•If the point dropped does not exist, then the user needs to define the point as described in the previous section. The same configuration process is used to define the point.
•If multiple points exist, the user is prompted to select the point number.
•If the point dropped already contains a reference to another input reference, a dialog box will appear inquiring whether or not to overwrite the existing reference.
•The point icon will appear to the right or left of the selected arrow as seen Figure
Note!
95
