Verizon Verizon One manual Add a New Name cont’d, Select Clear to delete backspace characters

51

Verizon One User Guide

14. Using the Handset Phonebook Menu

14.2 Add a New Name (cont’d)

1.Enter a name with up to 11 characters at the blinking underscore using the keypad characters (0-9, *, #).

Note: If you try to input more than 11 characters, an error tone will be heard and additional input will not be accepted.

If you are saving a Name from your Incoming Calls Log, the caller’s Name will be already be displayed in the “Name” field as it appeared on your Caller ID, as displayed below:

2.Select [Clear] to delete (backspace) characters.

3.Press <OFF> to return to the Standby screen. This will cancel your input. Or,

4.Press <Up/Down> while you are at the Name screen to display the Number screen:

5.Enter a number at the blinking underscore using the keypad characters (0-9, *, #). Ignore dashes as they will be inserted for you.

If you are saving a Number from your Incoming Calls Log, the caller’s Number will be displayed in the “Name” field as it appeared on your Caller ID, as displayed below:

6.Select [Clear] to delete (backspace) numbers, if you make an error.

Note: Press the # symbol once to enter “#.” Press the # symbol twice to insert “P,” which provides a 3 second pause during dialing. If you try to input more than 24 digits, an error tone will be heard and additional digit input will not be accepted.

© 2006 Verizon