57

Verizon One User Guide

15. Using Intercom and Call Transfer Functions

15.1.2 No Answer From a Page

If a Page is not answered, a “No answer” message will be displayed on the device that originated the Page when:

There is no answer from the Paged party after two minutes

The Paged party chose not to answer by pressing [Exit] or <OFF> “Verizon One.” The Handset can respond to a “No answer” message in one of the following ways:

Select [Exit] and the Handset returns to a Standby screen

Press <OFF>

Wait for the Page to timeout and return to the Standby screen

15.1.3Using the Intercom During an Active Call

When you are on an active call, press <Intercom> on the Handset which will put the call On Hold and start the paging menu. The Base will automatically

be paged. You will see “Call on Hold” BLINKING on the Handset screen.

Select [Exit] or press <Intercom> if you want to stop paging, take a call off hold, or return to the TALK mode:

If <Speakerphone> or <Intercom> is pressed on the Base, an intercom connection is established with “Verizon

One,” and “Base”. The external call is still on Hold. The Talk screen will alternate with the “Intercom Base Vol-2” and the “Call on Hold” screen in 1-second intervals.

If the Base disconnects the Intercom page the “Verizon One” Handset will return to a TALK mode and display the “Call on Hold” message. You can then press [Unhold] to return to the external call:

This same process is used to Transfer a Call or to Conference the external caller with the Handset and the Base, as described in the next sections:

© 2006 Verizon

Page 57
Image 57
Verizon Verizon One manual No Answer From a, Using the Intercom During an Active Call