112

Verizon One User Guide

20. Home Networking

20.2Important Information About Your Verizon One Home Network (cont’d)

Note: Hereafter, the Verizon One Communications Subsystem will be referred to as “Verizon One,” “Gateway,” or “Modem.”

Your Verizon One Wireless Home Network was shipped to you disabled (turned OFF). Enable (turn ON) your Wireless Network by:

1.Selecting Menu on the Verizon One touch-screen display

2.Select Settings

3.Select Wireless

The Wireless Network screen on the Verizon One touch-screen display will also allow you to create your Wireless Network Name (called a Service Set ID

or SSID). The default SSID for Verizon One is: Verizon One followed by the last 4-digits of the unit’s serial number (located below the bar code on the bottom of the unit). For example: VerizonOne1234.

20.3Installing Your Verizon One Home Network

This section explains how to install your Verizon One Home Network:

Home Networking System Requirements – See Section 20.3.1

Verizon One LED Indicators – See Section 20.3.2

Verizon One Interface Descriptions

– See Section 20.3.3

Installing a Wired Network – See Section 20.3.4

Installing a Wireless Network – See Section 20.3.5

Installing both a Wired and a Wireless network simultaneously – See Section 20.3.6

© 2006 Verizon

Page 112
Image 112
Verizon manual Installing Your Verizon One Home Network, Select Settings Select Wireless