61

Verizon One User Guide

15. Using Intercom and Call Transfer Functions

15.5 Out-of-Range Detection

If the Handset detects an out-of-range condition, it will start searching for the Base and display the following screen:

After the Handset finds the Base, the Handset will display the Standby screen. If the Handset cannot find the Base, the Handset will emit an error tone and display an “Out of range” message. The user should then move closer to the Base until the Handset is within range again:

© 2006 Verizon

Page 61
Image 61
Verizon Verizon One manual Out-of-Range Detection