Verizon manual Installing the Verizon One Base Unit, Choosing a Location to Install, Step

18

Verizon One User Guide

7. Installing the Verizon One Base Unit

7.1Choosing a Location to Install

Verizon One

For optimal performance of Verizon One, choose a location that is:

•Away from active electrical areas

•Away from interference such as a television, radio or microwave oven

•Away from water or moisture, excessive dust, or extreme cold

•Away from heat sources and sunlight

•In a central location that has no obstructions—this will optimize cordless performance

•Separate from another Verizon One Base Unit

7.2Installing the Base Unit on a Desktop or Flat Surface

Step 1

Attach the Verizon One Base Unit to the Swivel Support Stand (Figure 1).

Snap the Verizon One Base Unit Swivel Support Stand onto the back of the Base Unit. Locate a sturdy, flat surface, table or desktop near an active wall AC power outlet, an active telephone jack and your primary computer.

Step 2

Plug in the Power Cord (Figure 2).

Connect the DC 12V power supply cord to the power connector marked 12V DC on the rear panel of the Verizon One Base Unit. Plug the other end of the power supply into an AC wall socket, and then turn on the power switch (if it is not on already). Check the Base to see if the Power LED is solid green. If the Power LED is solid green, Verizon One power is on.

Figure 1

Power is On

Figure 2

© 2006 Verizon