Verizon Verizon One manual Privacy Settings

128

Verizon One User Guide

20.Home Networking

20.4Accessing Configuration Settings (cont’d)

Privacy Settings
Authentication Type	Factory Default = Open System.
	Possible Response: Open System: Open System authentication is the default selection.
	Shared Key: To use Shared Key authentication, WEP must be enabled, and a valid WEP key must be present.
	Enabling WEP does not force the use of Shared Key authentication. It is permissible to have WEP enabled and
	still use Open System authentication.
WEP Security WEP	Factory Default = Disabled.
Security	The AP card supports 64-bit, 128-bit, or 256-bit WEP encryption. If WEP is Disabled, any station can connect
	to the AP (as long as its SSID matches the AP SSID).
WEP (Wired Equivalent	If WEP is enabled, the risk of someone nearby accessing the AP is minimized.
Privacy)
Key Select	If selected, the WEP Key is treated as a string of text characters, and the number of characters must be either 5
	(for 64-bit encryption) or 13 (for 128-bit encryption) or 29 (for 256-bit encryption). If not selected, the WEP key is
	treated as a string of hexadecimal characters, and the number of characters must be either 10 (for 64-bit
	encryption), 26 (for 128-bit encryption), or 58 (for 256-bit encryption). The only allowable hexadecimal characters
	are 0-9 and A-F.
	Note: The WEP key must be the same value and type for both Verizon One and the wireless network adapter.
	“Pass Phrase” is not the same as “text” and should not be used.

© 2006 Verizon