26

Verizon One User Guide

9. Registering the Handset to the Base Unit

9.1 Registration Procedure

After successfully charging your Verizon One Handset, you must perform a registration procedure to allow the Handset to communicate with the Base Unit. To register the Handset to the Base Unit, perform these steps:

1.Select the <Menu> function on the Handset.

2.Using the round navigation button, scroll down to fi nd the [Registration] menu. Next, press the top left corner key to select Registration.

3.Once you have selected Registration, the Handset will instruct you to press and hold the <Intercom> key on the Base Unit. Press and hold this key for 3 seconds.

4.After 3 seconds, the Handset will automatically register to the Base Unit.

To verify successful registration, press the <Talk/Flash> button on the Handset. A dial tone will be heard from the Handset and a call may be placed successfully. If no dial tone is heard, but the Handset indicated that it had successfully registered with the Base, verify that the Base Unit is connected to an active telephone line and that this line is plugged into the DSL/ Phone port on the back of the Base Unit.

Each Verizon One phone comes with one

(1)cordless handset. Up to four additional handsets may be purchased separately and registered to the Verizon One base station to create a phone system with fi ve

(5)distinct handset and intercom locations.

© 2006 Verizon

Page 26
Image 26
Verizon Verizon One manual Registering the Handset to the Base Unit, Registration Procedure