Verizon manual Verizon One Handset Controls, Handset Control Buttons

28

Verizon One User Guide

10. Verizon One Handset Controls

10.1 Handset Control Buttons

The following control buttons are provided on the Verizon One Handset:

Note: “Off-Hook” refers to the condition when either the Base Unit or Handset is active in requesting a dial tone or is engaged in a call. “On-Hook” refers to the condition when either the Base Unit or Handset is not active in requesting a dial tone or placing a call.

Button	Function
Volume Up/	Pressing these buttons will raise/lower the volume of the Handset
Volume Down	Ringer when the Handset is On-Hook. The ringer volume can be
(On side of	set to low, medium, high, or off. The ringer level will be displayed
	while you are changing the volume. Pressing these buttons when
Handset)
	in an Off-Hook mode will adjust the speaker volume.
Talk/Flash	When pressed initially, this button places the phone in an Off-
	Hook status, and you may dial the desired phone number. When
	pressed during an active call, it will simulate a momentary press
	and release of the phone’s hook switch and will put the active call
	on hold and accept an incoming call as with Call Waiting* or 3-
	Way Calling** features.
Off/Clear	Pressing <Off/Clear> enables you to end any call by placing the
	phone On-Hook. <Off/Clear> is also used to clear entries and
	selections made on the soft-menu available on the Handset LCD.

*Call Waiting subscription is required. **3-Way Calling subscription is required.

© 2006 Verizon