Vision Fitness T9700 Runner's manual Auto-Calibration, Exit User Engineering Mode

AUTO-CALIBRATION

DO NOT STAND ON THE BELT WHEN PERFORMING THE AUTO-CALIBRATION!

You need to access User Engineering Mode to run the Auto Calibration. To access this mode, please hold down SPEED DOWN and SELECT for 5 seconds. When in the User mode, "User Mode" appears in the alphanumeric window. To access the data press the ELEVATION keys until "Auto-Cal"appears. Press Start to select this function.

To begin auto-cal, press START. The treadmill will run through minimum and maximum speed and maximum incline. This will take 3-5 minutes. Let the treadmill perform this complete function before exiting the Engineering Mode.

Elevation A/D or Elevation in % appears in the left window. PWM value or Speed appears in the right window. "Cal Passed" will appear in the center window when the auto-calibration is complete. The treadmill will come to a complete stop and return to the start-up screen in the alphanumeric window.

EXIT USER ENGINEERING MODE

P19 represents exit mode. When you press START to select the function, the console performs a reboot, returning to program setup.

56