362 VT1422A Command Reference Chapter 7
[SENSe]

[SENSe:]REFerence:THERmistor:RESistance:POST?

[SENSe:]REFerence:THERmistor:RESistance:POST? (@<thr_ch>) returns the
programmed sum of the resistor values in the thermistor divider circuit.
This command is valid only on the VT1529B and is available with VXIplug&play
driver revision A.01.09 or later (revision A.01.06 or later of hpe1422_32.dll).
Parameters

Comments The <thr_ch> parameter must be a single channel only.

When Accepted: Not while INITiated
Related Commands: SENS:REF:THER:RES:POST
*RST Condition: SENS:REF:THER:RES:POST 400000
Send with VXIplug&play Function: hpe1422_cmd(...)
Usage SENSE:REF:THER:RES:POST 397000,(@10001) divider circuit for thermistor on channel
10001 has 397 kΩ total resistance

[SENSe:]STRain:BRIDge[:TYPE]

[SENSe:]STRain:BRIDge[:TYPE] <select>,(@<ch_list>) sets the VT1529A/B’s
bridge configuration switches for channels specified by <ch_list>.
Parameters

Comments For a description of the effects of <select> see "VT1529A/B Bridge

Configurations" on page 70.
Related Commands: SENSE:FUNC:
*RST Condition: SENS:STR:BRIDG[:TYPE] FBEN for all VT1529A/B
channels.
Parameter
Name Parameter
Type Range of
Values Default
Units
resistance numeric (float32) 1800 to 520,000 ohms
thr_ch channelli st(stri ng) 10000 - 15731 none
Parameter
Name Parameter
Type Range of
Values Default
Units
select discrete (string) FBENding | HBENding | Q120 | Q350 |
USER none
ch_list channel list (string) 10000 - 15731 none