VXI VT1422A, VT1529A/B Two Interconnect Methods

Programming the VT1422A & VT1529A/B for Remote Strain Measurement 63Chapter 3
Two Interconnect
Methods
Depending on the Terminal Module ordered with the VT1422A, there are
two methods of interconnecting a VT1529A/B to the VT1422A (connection
"A" in Figure 3-1).
The Option 001 RJ-45
Connector Module
The RJ-45 Connector Module is used when most or all of VT1422A SCP
positions contain a VT1539A Remote Channel SCP. For RSCUs, simply
plug one end into the VT1422A and the other into the VT1529A/B’s Data
Interface connector. Figure 3-5 shows this connection and includes a
schematic diagram of the RJ-45-to-RJ-45 cable. See Figure 2-4 on page 41
for on-board SCP channel connection through the RJ-45 connector module.
Figure 3-5. Connecting VT1529A/Bs to the RJ-45 Connector Module
VT1422A-001
Length up to 100 feet (304.8 m)
VT1529A/B
Shield Shield
TIA/EIA 568A
Wiring Diagram
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Wht/Grn
Grn
Wht/Org
Blu
Org
Wht/Brn
Brn
Wht/Blu
Twisted Pair
Twisted Pair Twisted Pair
Twisted Pair