A C C E S S O R I E S
Optional accessories are available through your Wolf dealer. To obtain local dealer information, visit the Showroom Locator section of our website, wolfappliance.com.
W O L F P R O V E N T I L A T I O N
P L A N N I N G I N F O R M A T I O N
Pro
30" (762), 36" (914), 42" (1067) and 48" (1219) widths.
Pro 24" (610) deep wall hoods are available in 30" (762), 36" (914), 42" (1067), 48" (1219), 54" (1372), 60" (1524) and 66" (1676) widths.
Pro 27" (686) deep wall hoods are available in 30" (762), 36" (914), 42" (1067), 48" (1219), 54" (1372), 60" (1524) and 66" (1676) widths.
Pro wall chimney hoods are available in 36" (914), 42" (1067), 48" (1219) and 54" (1372) widths.
Pro island hoods are available in 36" (914), 42" (1067), 54" (1372) and 66" (1676) widths.
IMPORTANT NOTE: For optimal performance in wall hood applications, a Pro 27" (686) deep wall hood is recommended for use with ranges and rangetops that contain a charbroiler or griddle.
Specifications on the following pages provide overall dimensions, blower and ducting consider- ations, and installation specifics for Pro wall and island hoods. We have minimized the informa- tion contained in the illustrations, concentrating on the critical information you need to plan your installation. Also refer to the Pro ventilation recommendations on pages
The overall dimensions illustrations include the optional rail dimensions. Overall width, height and depth dimensions will remain the same if a decorative rail is not to be used.
Pro wall hoods should be at least as wide as the cooking surface; an overlap of 3" (76) on either side is recommended. Island hoods should always be larger than the cooking surface by a minimum of 3" (76) on each side.
Installation of all Pro wall and island hoods should be 30" (762) to 36" (914) from the bottom of the hood to the countertop.
Optional classic stainless steel duct covers are available in heights of 6" (152), 12" (305), 18"
(457)and 24" (610) for all Pro wall and island hoods.
E L E C T R I C A L R E Q U I R E M E N T S
Wolf Pro wall and island hoods require a separate, grounded 120 V AC, 60 Hz power supply. The service should have its own 15 amp circuit breaker. Placement of the electrical supply is not critical, as long as you provide enough
120 V AC power cable to make your electrical connections. Note that for some wall hoods, placement of the electrical supply will differ between vertical and horizontal discharge loca- tions. Refer to pages
Locate electrical within the shaded area shown in the Installation Specifications illustration for your model.
IMPORTANT NOTE: A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.
You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service.
Dimensions in parentheses are in millimeters unless otherwise specified.
