Wolf Appliance Company SO30F/S manual New Model CT36EU NEW Available November, 361/8

W O L F E L E C T R I C C O O K T O P S

O V E R A L L D I M E N S I O N S

New Model CT36EU

21"

(533)

OVERALL

DEPTH

36" (914)

OVERALL WIDTH

41/4" (108) 51/2" (140)

CONDUIT

Unit dimensions may vary to ± 1/8" (3).

I N S T A L L A T I O N S P E C I F I C A T I O N S

New Model CT36EU

NEW Available November 2007

S P E C I F I C A T I O N S

New Model CT36EU

Overall Width	36" (914)
Overall Height	41/4" (108)
Overall Depth	21" (533)
Heating Elements	Four
Temperature Zones	Five
Max Element Power
Triple	1050 / 2200 / 2700 W
Dual	700 / 2200 W
Singles	1200 W and (2) 1800 W
Singles with Bridge	4400 W
Cabinet Width	39" (991) rec
	36" (914) min
Cabinet Depth	22 3/4" (578) min
Height Clearance	41/2" (114) min
Cut-Out Width	34 3/8" (873)
Cut-Out Depth	19 3/8" (492)
Electrical Supply	240 V AC / 60 Hz / 50 amp

13" max
(330)	18"
	(457)
SEE COUNTERTOP
CUT-OUT BELOW
4"min (102)
24"min	36" (914)
(610)	STANDARD
	FLOOR TO
	COUNTERTOP
	HEIGHT

		39" (991)
2"*min (51)			RECOMMENDED CABINET WIDTH		30" (762)
				36"min (914)	COUNTERTOP TO
CUT-OUT TO				SEE COUNTERTOP	COMBUSTIBLE
COMBUSTIBLE					MATERIALS
	MATERIALS			CUT-OUT BELOW	ABOVE COOKTOP
(BOTH SIDES)

41/2" (114)
31/2" (89)	E
4"min (102)	10"
TO OVEN	(254)
OPENING
36-INCH OVEN OPENING

	208 V AC / 60 Hz / 40 amp
Conduit	4' (1.2 m) flexible 3-wire
Electrical Rating	10.5 kW at 240 V
	7.9 kW at 208 V
Shipping Weight	60 lbs (27 kg)

The outer diameter of the heating elements are 12" (305), 9" (229), two 8" (203) and 61/2" (165). The bridge with elements is 8" (203) x 17" (432).

IMPORTANT NOTE: A minimum height clearance of 61/4" (159) is required between countertop and any combustible surface directly below cooktop.

I N S T A L L AT I O N O P T I O N S

The Model CT36EU unframed electric cooktop can be mounted flush with the top of the countertop or as a frameless installation sitting on top of the countertop surface. In either installation the cooktop cut-out dimen- sions are the same. If mounted flush with the countertop, a recessed area surrounding the

*Minimum clearance from both side edges and back edge of cooktop cut-out to combustible materials up to 18" (457) above countertop.

Countertop Cut-Out Dimensions						361/8"** (918)
									RECESSED AREA FOR
							FLUSH MOUNT INSTALLATION ONLY
	RECESSED AREA FOR		15/16" (33)			343/8" (873)
FLUSH MOUNT INSTALLATION ONLY				RADIUS				COOKTOP CUT-OUT WIDTH
	COUNTERTOP									2"* (51)
7/8"		PROFILE							7/16" (11) RADIUS
			211/8"** (537)
	(22) max		RECESSED AREA			193/8" (492)
			FOR FLUSH MOUNT								COOKTOP
			INSTALLATION ONLY							CUT-OUT DEPTH
					19/16" (40)
5/16"(8)
								FRONT OF COUNTERTOP
**Minimum dimension, but may be exceeded by up to 1/8" (3).						27/16" (62)

IMPORTANT NOTE: For flush mount applications, it is recommended that you measure the cooktop glass before cutting the countertop to ensure a proper fit. Small variances may exist between the template and the cooktop.

cooktop cut-out is required.

IMPORTANT NOTE: Flush mount installations are intended for granite, solid surface or stone countertop surfaces only. If the cooktop is to be mounted flush with the countertop, fabrica- tion of the recessed area must take place before the countertop installation. A template of the countertop cut-out will be provided with the cooktop for fabrication purposes.

A Wolf 36" (914) L Series single oven may be installed below the Model CT36EU. For this installation, unless you are using cabinets deeper than 24" (610), it is recommended that the electrical supply be placed in the base cabinet to the right of the oven. A 30" (762)

L Series or E Series single oven may also be installed below the Model CT36EU.

When a 36" (914) L Series oven is installed below a cooktop, it is recommended that the rough opening for the oven be 7 3/4" (197) from the floor to ease use of the oven door. 47