Wolf Appliance Company SO30F/S manual Model IS15/S Electric Steamer Module, 123/8 131/2

W O L F I N T E G R A T E D M O D U L E S

P L A N N I N G I N F O R M A T I O N

The illustrations provide the overall dimensions and finished cut-out dimensions that you need to plan for in your installation.

IMPORTANT NOTE: When multiple cooktops or modules are installed side by side, refer to page 55 for countertop cut-out dimensions.

For the drain connection, the 5/8" (16) outlet from the valve will accept a drain hose that must flow downward to, and tie into, an existing sink drain. A separate drain with a freefall may also be installed. (Following local building codes, your plumber will dictate how to plumb the unit.) As a third option, the consumer will supply a heat resistant bucket for drainage in the location of the drain outlet. Refer to the illustration for location of the drain outlet.

The steamer module can accommodate a Wolf cooktop hood or Pro ventilation hood or hood liner. When installing a ventilation hood, refer to the specific requirements of the hood for the minimum dimension to the countertop. Refer to pages 92–114 for ventilation specifications.

IMPORTANT NOTE: Wolf does not recommend the use of downdraft ventilation with the steamer module.

E L E C T R I C A L R E Q U I R E M E N T S

The Wolf electric steamer module requires a separate, grounded 3-wire 240/208 V AC, 60 Hz, 15 amp service with its own circuit breaker. Locate electrical within the shaded area shown.

You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service.

I N S T A L L A T I O N S P E C I F I C A T I O N S

Model IS15/S

S P E C I F I C A T I O N S

Model IS15/S

Electric Steamer Module

13" max

(330)

2"** 191/4" (489)

(51) COOKTOP CUT-OUT

DEPTH

123/8"

(314) 75/8"

(194)

DRAIN OUTLET

LOCATION

18"

(457)

21/2"min

(64)

36" (914)

STANDARD

FLOOR TO

COUNTERTOP

HEIGHT

	33" (838) RECOMMENDED
7"*min (178)	CABINET WIDTH		30" (762)
	14" (356)		COUNTERTOP TO
CUT-OUT TO			COMBUSTIBLE
COMBUSTIBLE	COOKTOP CUT-OUT		MATERIALS
MATERIALS	WIDTH		ABOVE COOKTOP
(BOTH SIDES)
	123/8"	131/2"
	(314)	(343)	DRAIN
	6"	OUTLET
	(152)	LOCATION
	E	15"
		(381)
	15"
	(381)

Exterior Finish	Classic
Overall Width	15" (381)
Overall Height	131/2" (343)
Overall Depth	21" (533)
Heating Element	2600 W
Cabinet Depth	22 3/4" (578) min
Height Clearance	131/2" (343) min
Cut-Out Width	14" (356)
Cut-Out Depth	191/4" (489)
Electrical Supply	240/208 V AC, 60 Hz
	15 amp circuit
Conduit	4' (1.2 m) flexible 3-wire
Electrical Rating	2.6 kW at 240 V
	1.9 kW at 208 V
Shipping Weight	40 lbs (18 kg)

Unit dimensions may vary to ± 1/8" (3).

NOTE: Application shown allows for installation of two 15" (381) modules side-by-side with 33" (838) recommended cabinet width. 18" (457) recommended cabinet width for installation of single 15" (381) cooktop or module. *Minimum clearance from both side edges of cooktop cut-out to combustible materials up to 18" (457) above countertop. **Minimum clearance from rear edge of cooktop cut-out to combustible materials up to 18" (457) above countertop.

			14" (356)
		COOKTOP CUT-OUT
Countertop Cut-Out Dimensions				WIDTH
					191/4" (489)
	21/2"min				COOKTOP
					CUT-OUT DEPTH
(64)
				FRONT OF COUNTERTOP

This steamer module must be installed at least 15" (381) away from a Wolf fryer module, as contact between water and hot oil may cause burns from steam and hot oil.

Refer to installation instructions shipped with each Wolf product for detailed specifications.

59