Wolf Appliance Company SO30F/S manual Shipping Weight Lbs 22 kg, Model CT30I/S

W O L F I N D U C T I O N C O O K T O P S

O V E R A L L D I M E N S I O N S

Model CT30I/S

21"

(533)

OVERALL

DEPTH

30" (762)

OVERALL WIDTH

31/2" (89) 41/2" (114)

TERMINAL BOX

Unit dimensions may vary to ± 1/8" (3).

I N S T A L L A T I O N S P E C I F I C A T I O N S

Model CT30I/S

NEW Available October 2007

S P E C I F I C A T I O N S

Model CT30I/S

Trim Finish	Classic
Overall Width	30" (762)
Overall Height	31/2" (89)
Overall Depth	21" (533)
Induction Elements	Four
Max Element Power	(2) 1800 W with
	3000 W boost,
	(2) 1200 W
Cabinet Width	33" (838) rec
	30" (762) min
Cabinet Depth	22 3/4" (578) min
Height Clearance	41/2" (114) min
Cut-Out Width*	28 3/8" (721)
Cut-Out Depth	191/4" (489)
Electrical Supply	240/208 V AC, 50/60 Hz
	40 amp circuit
Conduit	4' (1.2 m) flexible 3-wire
Electrical Rating	7.2 kW at 240 V

13" max

(330)

2"** 191/4" (489)

(51) COOKTOP CUT-OUT

DEPTH

24"min

(610)

18"

(457)

21/2"min

(64)

36" (914)

STANDARD

FLOOR TO

COUNTERTOP

HEIGHT

		33" (838) RECOMMENDED
2"*min (51)			CABINET WIDTH	30" (762)
			30"min (762)	COUNTERTOP TO
CUT-OUT TO		283/8" (721) COOKTOP		COMBUSTIBLE
COMBUSTIBLE				MATERIALS
	MATERIALS		CUT-OUT WIDTH	ABOVE COOKTOP
(BOTH SIDES)

41/2" (114)
31/2" (89)	E
33/4"min	10"
(95)
	(254)
30-INCH OVEN OPENING

	6.3 kW at 208 V
Shipping Weight	48 lbs (22 kg)

*If the 30" (762) cooktop is to be used with any combination of additional cooktop units or modules with a filler strip, the cut-out width increases to 29" (737).

The diameter of the induction elements are 51/2" (140), 6 3/4" (171) and two 8 3/4" (220).

IMPORTANT NOTE: A minimum height clearance of 6" (152) is required between countertop and any combustible surface directly below the cooktop.

IMPORTANT NOTE: If a shelf is installed below the cooktop, a 1" (25) gap at the rear of the cabinet shelf is necessary to allow for proper ventilation. Failure to do so could result in decreased performance or product damage.

I N S T A L L AT I O N O P T I O N S

*Minimum clearance from both side edges of cooktop cut-out to combustible materials up to 18" (457) above countertop. **Minimum clearance from rear edge of cooktop cut-out to combustible materials up to 18" (457) above countertop.

Countertop Cut-Out Dimensions			283/8" (721)
		COOKTOP CUT-OUT WIDTH
				191/4" (489)
	21/2"min			COOKTOP
				CUT-OUT DEPTH
(64)
		FRONT OF COUNTERTOP

A Wolf 30" (762) L Series or E Series single oven may be installed below the 30" (762) induction cooktop. For this installation, unless you are using cabinets deeper than 24" (610), it is recommended that the electrical supply be placed in the base cabinet to the right of the oven. A 36" (914) L Series single oven may also be installed below the 30" (762) induction cooktop. Refer to the built-in ovens section for additional specifications.

Refer to installation instructions shipped with each Wolf product for detailed specifications.

33