Wolf Appliance Company SO30F/S manual Model CT30EU, 102, 301/8, 211/8

Discontinued November 2007

S P E C I F I C A T I O N S

Model CT30EU

Overall Width	30" (762)
Overall Height	4" (102)
Overall Depth	21" (533)
Heating Elements	Four
Temperature Zones	Six
Max Element Power	750 W/2200 W and
(two dual)	950 W/1900 W
Max Element Power	1200 W and 1500 W
(two single)
Cabinet Width	33" (838) rec
	30" (762) min
Cabinet Depth	22 3/4" (578) min
Height Clearance	4" (102) min
Cut-Out Width	28 3/8" (721)
Cut-Out Depth	19 3/8" (492)
Electrical Supply	240 V AC / 60 Hz / 40 amp

W O L F E L E C T R I C C O O K T O P S

O V E R A L L D I M E N S I O N S

Model CT30EU

21"

(533)

OVERALL

DEPTH

30" (762)

OVERALL WIDTH

4" (102)

Unit dimensions may vary to ± 1/8" (3).

I N S T A L L A T I O N S P E C I F I C A T I O N S

Model CT30EU

	208 V AC / 60 Hz / 30 amp
Conduit	4' (1.2 m) flexible 3-wire
Electrical Rating	6.8 kW at 240 V
	5.2 kW at 208 V
Shipping Weight	45 lbs (20 kg)

The outer diameter of the heating elements are 9" (229), 81/2" (216), 7" (179) and 61/2" (165).

I N S T A L L AT I O N O P T I O N S

The Model CT30EU unframed electric cooktop can be mounted flush with the top of the countertop or as a frameless installation sitting on top of the countertop surface. In either installation the cooktop cut-out dimen- sions are the same. If mounted flush with the countertop, a recessed area surrounding the cooktop cut-out is required.

IMPORTANT NOTE: Flush mount installations are intended for granite, solid surface or stone countertop surfaces only. If the

13" max
(330)	18"
	(457)
SEE COUNTERTOP
CUT-OUT BELOW
4"min (102)
24"min	36" (914)
(610)	STANDARD
	FLOOR TO
	COUNTERTOP
	HEIGHT

		33" (838) RECOMMENDED
				30" (762)
2"*min (51)			CABINET WIDTH
			30"min (762)	COUNTERTOP TO
CUT-OUT TO		SEE COUNTERTOP		COMBUSTIBLE
COMBUSTIBLE				MATERIALS
	MATERIALS		CUT-OUT BELOW	ABOVE COOKTOP
(BOTH SIDES)

4" (102)
31/2" (89)	E
	10"
	(254)

30-INCH OVEN OPENING

cooktop is to be mounted flush with the countertop, fabrication of the recessed area must take place before the countertop instal- lation. A template of the countertop cut-out will be provided with the cooktop for fabrica- tion purposes.

A Wolf 30" (762) L Series or E Series single oven may be installed below the Model CT30EU. For this installation, unless you are using cabinets deeper than 24" (610), it is recommended that the electrical supply be placed in the base cabinet to the right of the oven. Refer to the built-in ovens section for additional specifications.

Dimensions in parentheses are in millimeters unless otherwise specified.

48

*Minimum clearance from both side edges and back edge of cooktop cut-out to combustible materials up to 18" (457) above countertop.

Countertop Cut-Out Dimensions						301/8"** (765)
								RECESSED AREA FOR
						FLUSH MOUNT INSTALLATION ONLY
	RECESSED AREA FOR		15/16" (33)					283/8" (721) COOKTOP
FLUSH MOUNT INSTALLATION ONLY				RADIUS					CUT-OUT WIDTH
	COUNTERTOP									2"* (51)
7/8"		PROFILE							7/16" (11) RADIUS
			211/8"** (537)
	(22) max		RECESSED AREA			193/8" (492)
			FOR FLUSH MOUNT								COOKTOP
			INSTALLATION ONLY							CUT-OUT DEPTH
					19/16" (40)
5/16" (8)
							FRONT OF COUNTERTOP
**Minimum dimension, but may be exceeded by up to 1/8" (3).						27/16" (62)

IMPORTANT NOTE: For flush mount applications, it is recommended that you measure the cooktop glass before cutting the countertop to ensure a proper fit. Small variances may exist between the template and the cooktop.