Wolf Appliance Company SO30F/S manual Model CT36EU Dis November

W O L F E L E C T R I C C O O K T O P S

O V E R A L L D I M E N S I O N S

Model CT36EU

21"

(533)

OVERALL

DEPTH

36" (914)

OVERALL WIDTH

4" (102)

Unit dimensions may vary to ± 1/8" (3).

I N S T A L L A T I O N S P E C I F I C A T I O N S

Model CT36EU

Discontinued November 2007

S P E C I F I C A T I O N S

Model CT36EU

Overall Width	36" (914)
Overall Height	4" (102)
Overall Depth	21" (533)
Heating Elements	Five
Temperature Zones	Eight
Max Element Power	1050 W/ 2200 W /
(triple)	2700 W
Max Element Power	750 W / 2200 W
(dual)
Max Element Power	1200 W, 1500 W
(three single)	and 1800 W
Cabinet Width	39" (991) rec
	36" (914) min
Cabinet Depth	22 3/4" (578) min
Height Clearance	4" (102) min
Cut-Out Width	34 3/8" (873)

13" max
(330)	18"
	(457)
SEE COUNTERTOP
CUT-OUT BELOW
4"min (102)
24"min	36" (914)
(610)	STANDARD
	FLOOR TO
	COUNTERTOP
	HEIGHT

		39" (991)
					30" (762)
2"*min (51)			RECOMMENDED CABINET WIDTH
				36"min (914)	COUNTERTOP TO
CUT-OUT TO			SEE COUNTERTOP		COMBUSTIBLE
COMBUSTIBLE					MATERIALS
	MATERIALS			CUT-OUT BELOW	ABOVE COOKTOP
(BOTH SIDES)

4" (102)
31/2" (89)	E
	10"
	(254)

36-INCH OVEN OPENING

Cut-Out Depth	19 3/8" (492)
Electrical Supply	240 V AC / 60 Hz / 50 amp
	208 V AC / 60 Hz / 40 amp
Conduit	4' (1.2 m) flexible 3-wire
Electrical Rating	9.4 kW at 240 V
	7.1 kW at 208 V
Shipping Weight	60 lbs (27 kg)

The outer diameter of the heating elements are 117/8" (302), 91/8" (232), 7 7/8" (200), 71/8" (181) and 61/2" (165).

I N S T A L L AT I O N O P T I O N S

The Model CT36EU unframed electric cooktop can be mounted flush with the top of the countertop or as a frameless installation sitting on top of the countertop surface. In either installation the cooktop cut-out dimen- sions are the same. If mounted flush with the countertop, a recessed area surrounding the cooktop cut-out is required.

*Minimum clearance from both side edges and back edge of cooktop cut-out to combustible materials up to 18" (457) above countertop.

Countertop Cut-Out Dimensions						361/8"** (918)
									RECESSED AREA FOR
							FLUSH MOUNT INSTALLATION ONLY
	RECESSED AREA FOR		15/16" (33)			343/8" (873)
FLUSH MOUNT INSTALLATION ONLY				RADIUS				COOKTOP CUT-OUT WIDTH
	COUNTERTOP									2"* (51)
7/8"		PROFILE							7/16" (11) RADIUS
			211/8"** (537)
	(22) max		RECESSED AREA			193/8" (492)
			FOR FLUSH MOUNT								COOKTOP
			INSTALLATION ONLY							CUT-OUT DEPTH
					19/16" (40)
5/16"(8)
								FRONT OF COUNTERTOP
**Minimum dimension, but may be exceeded by up to 1/8" (3).						27/16" (62)

IMPORTANT NOTE: For flush mount applications, it is recommended that you measure the cooktop glass before cutting the countertop to ensure a proper fit. Small variances may exist between the template and the cooktop.

IMPORTANT NOTE: Flush mount installations are intended for granite, solid surface or stone countertop surfaces only. If the cooktop is to be mounted flush with the countertop, fabrica- tion of the recessed area must take place before the countertop installation. A template of the countertop cut-out will be provided with the cooktop for fabrication purposes.

A Wolf 36" (914) L Series single oven may be installed below the Model CT36EU. For this installation, unless you are using cabinets deeper than 24" (610), it is recommended that the electrical supply be placed in the base cabinet to the right of the oven. A 30" (762)

L Series or E Series single oven may also be installed below the Model CT36EU.

When a 36" (914) L Series oven is installed below a cooktop, it is recommended that the rough opening for the oven be 7 3/4" (197) from the floor to ease use of the oven door.

49