Manuals / Brands / Computer Equipment / Printer / Worth Data / Computer Equipment / Printer

Worth Data RF Laser MSI and Plessey , Codabar , 2 of 5 Code

1 60

Download 60 pages, 1.37 Mb

13

MSI and Plessey

Disable MSI 0

Enable MSI with 1 Mod 10 check digit 1

Enable MSI with 2 Mod 10 check digits 2

Enable MSI with 1 Mod 11 and 1 Mod 10 check digit 3

Transmit No Check Digits 4

Transmit 1 Check digit 5

Transmit 2 Check digits 6

Enable Plessey (mutually exclusive with MSI) 7

Enable LabelCode5 8

Enable LabelCode4 9

For more information about MSI code, see Appendix I.

Codabar

Enable Codabar 0

Disable Codabar 1

Enable CLSI Codabar 2

Disable CLSI Codaber 3

Enable Start/Stop Character Transmission 4

Disable Start/Stop Character Transmission 5

For information about Codabar, see Appendix E.

CLSI format is a form of Codabar often used by libraries.

Enabling Start/Stop character transmission means that the RF Laser will transmit

start/stop characters to your computer along with data. If you're varying

start/stop characters with different label types, you'll want to enable

transmission.

2 of 5 Code

Enable Interleaved 2 of 5 0

Disable Interleaved 2 of 5 1

Enable Interleaved 2 of 5 Check Digit 2

Disable Interleaved 2 of 5 Check Digit 3

Enable Check Digit Transmission 4

Disable Check Digit Transmission 5

Enable Standard 2 of 5 6

Disable Standard 2 of 5 7

For information about Interleaved and Standard 2 of 5, see Appendix G.

Enabling the Check Digit requires the data's units position to match the

calculation for the check digit explained in Appendix F. If you've enabled the

check digit, enabling Check Digit transmission causes the reader to transmit it

to your computer along with the bar code data.

Contents

Main Table Of Contents Introduction Installation Components of RF Laser Readers Scanner Beeps and LEDs (what they mean) USB Installation Installing the R/F Reader with a dedicated serial port Installing the R/F Reader between a computer and terminal R/F Laser Serial Model Pin-outs Configuring the RF Laser Reader for your computer and application Laser Scanning Instructions Using The RF Laser Setup Menu RF Laser Setup Parameters Channel Code 3 of 9 (Code 39) UPC/EAN Code 128 MSI and Plessey Codabar 2 of 5 Code 2 of 5 Data Length Code 93 Terminator characters (This applies to the BASE only) Beep Options Preamble Postamble Characters Set ID Character Link Test Code Reset DIFFICULT CODE SETUP OPTIONS Page RF Base Station Parameters Baud rate Data bits Parity Stop bits Test the RF Laser with your computer TEST LABEL Page Radio Considerations Operating Instructions Operational Details Range Accumulate Mode 4 5 6 1 2 3 0 Clear Buffer Enter Function/Control Key Support Page Troubleshooting All Models Troubleshooting USB Trouble Shooting Windows XP: Win98/ME: Win2000: Serial Troubleshooting Page Appendix A Changing Jumpers and Channels Page Appendix B Recharging the Batteries Appendix C Specifications for Code 39 *C39* Code 39 Advanced Features and Functions Mod 43 Check Character Full ASCII Extension to Code 39 Appendix D Code 93 Specifications Appendix E Codabar Specifications Codabar start/stop transmission Appendix F Code 128 Specifications UCC-128/ EAN-128 Page Appendix G Interleaved 2 of 5 Code Interleaved 2 of 5 Mod 10 check digit calculation Page Appendix H UPC Specifications UPC 2 and 5-character supplemental codes ISBN Specifications The UPC/EAN checksum character Checksum calculation for UPC-A, EAN-13 and EAN-8 UPC-E Checksum Calculation Appendix I MSI/Plessey Specifications Page RF Laser Setup Menu */+/* */-/* *--* */0/* */K/* */1/* */2/* */+/* */-/* Code 3 of 9 UPC/EAN */A/* */B/* 2 of 5 Code 2 of 5 Length */C/* Page Page *%U* Page Page Index 2 8 A B E F H I L S T U V W