Xantrex Technology XW6048-120/240-60, XW4024-120/240-60, XW4548-120/240-60 Grounding the AC System

Inverter/Charger Installation

Grounding the AC System

Important: Place the Neutral-to-ground bond in a permanently installed AC distribution panel that is part of the system. This may be a main panel or a sub-panel.

See Table 2-4 on page 10 for torque values for the AC terminal and AC Ground bar.

See Figure 2-8 on page 2–11 for torque requirements for the ground bar in the XW Power Distribution Panel.

Actual ground requirements may vary.
	* Depending on the location of the generator and
In an off-grid installation (i.e., where no utility grid is available), the
generator can be connected to the breakers provided in the XW Power	local code requirements, the generator disconnect
Distribution Panel. No additional breaker is required.	may be located in the power distribution panel.

Figure 2-14Grounding the AC System using the Distribution Panel

2–18 975-0239-01-01