Xerox 230, 340, 332, 220 Changing the Settings, Access the Setup Tools, Switch On, About Setups

Models: 230 332 340 220

1 116
Download 116 pages 62.05 Kb
Page 19
Image 19
Changing the Settings

Changing the Settings

Switch On

To switch ON the power to the Document Centre 220/230/332/340 press the Power ON/OFF button which is located on the upper-right side, near the front of the machine. It takes approximately 3 minutes for the machine to warm up and perform a self-test.

CAUTION To avoid damage to the machine after switching OFF, allow at least 10 seconds before switching the power ON again.

The first time the machine is switched ON, a message is displayed. Follow the instructions in the pop-up window to enable the machine to synchronize its components. This message will not be displayed again.

Access the Setup Tools

When the Document Centre 220/230/332/340 is delivered, it contains a default password (#22222) which can be used to provide access to the Setup Tools prior to PINs and Access Rights being assigned.

To change the default password refer to “Access Rights” on

Page 7-1.

About Setups

Xerox Document Centre 220/230/332/340 Setup Guide

Page 2-5

Page 19
Image 19
Xerox 230, 340, 332, 220 setup guide Changing the Settings, Access the Setup Tools, Switch On, About Setups