Xerox 332, 340, 220, 230 setup guide Foreign Interface Device, Quick Pathway, Auditron Setups

Foreign Interface Device

Quick Pathway

Press the Access button on the Control Panel

Touch the # button on the Control Panel Enter Auditron Administrator PIN - see

NOTE

¿Touch Auditron Setups Touch Foreign Interface.

Off

Per-Page Control

Monitor

A Foreign Interface Device might be a coin-operated device, a bill acceptor, a card reader, or a network controlled tracking system installed on the system. The device must initially be enabled by the Xerox representative.

NOTE: This device controls only Copier print services and has no bearing on the Fax services.

¿Access Auditron Setups as described on Page 6-2.

Touch the Foreign Interface button. Make selections as required - a description of each follows.

to specify that a Foreign Interface Device is not connected.

to set the device for tracking each page in each job separately. For example, for a coin-operated device, set External Auditron to Per-Page Control. Otherwise, more than the current page will be printed, even though only one coin was inserted.

to set the device to track the usage of the machine, but not to limit users to a number of copies or prints.

Auditron Setups

Xerox Document Centre 220/230/332/340 Setup Guide Page 6-15