Xerox 5500 manual Toner Is Low

		Front Panel Messages
Error or Warning Messages (Continued)
Message	Description
Stapler Is Empty.	Replace the Staple Cartridge. Printing continues without
	stapling.
	1.	Open Door G.
	2.	Replace Staple Cartridge P/N 008R12941 above R1
		area.
	3.	Close Door G.
Temperature Sensor Failure	An error was detected in the temperature sensor. Print
	quality may be degraded.
	1.	Turn power off, then on.
	2.	If error continues, call Service.
Toner Cartridge Failure	The Toner Cartridge has failed and it must be replaced.
	1.	Open the Printer Front Door.
	2.	Pull out the Toner Cartridge.
	3.	Replace with P/N 113R00668.
	4.	Close the Printer Front Door.
Toner Is Low	The Toner Cartridge is almost empty.
	Order replacement P/N 113R00668.
Tray [2 3 4 5 6] Failure	Open And Close Tray [2 3 4 5 6]. An error was
	detected in Tray [2 3 4 5 6]. Printing continues using
	other input trays.
	1.	Open and close Tray [2 3 4 5 6].
	2.	If error continues, call Service.
Tray [2 3 4 5 6] is missing	Reinstall the indicated tray.
Tray [2 3 4 5 6] Paper Is Low.	The indicated tray is nearly empty. Reload the same size
	and type of paper soon.
Tray [2 3 4 5] Failure	Open And Close Tray [2 3 4 5]. An error was detected in
	Tray [2 3 4 5]. Printing continues using other input
	trays.
	1.	Open and close Tray [2 3 4 5].
	2.	If error continues, call Service.
Tray [2 3 4 5] Paper Guide Does	1.	Check that the tray's paper guides are against the
Not Match Size Menu		paper stack.
	2.	Set the tray's Change Paper Size menu to the size of
		paper in this tray.
Tray 1 (MPT) Paper Guide Does Not	1.	Check that the Tray 1 (MPT) paper guides are against
Match Size Menu		the paper stack.
	2.	Set the tray's Change Paper Size menu to the size of
		paper in this tray.

Phaser® 5500 Laser Printer

4-69