Xerox 5500 manual InfoSMART Knowledge Base Documents English only, Reference Name Title

Connections and Internet Protocol (TCP/IP)

Manually Setting the Printer’s IP Address

Note

Ensure that your computer has a properly configured IP address for your network. Contact your network administrator for more information.

If you are on a network without a DNS server, or in an environment where the network

administrator assigns printer IP addresses, you can use this method to manually set the IP address. Manually setting the IP address overrides DHCP and AutoIP. Alternatively, if you are in a small office with a single PC and use a dialup modem connection, you can manually set the IP address.

1.At the printer's front panel, select Printer Setup, then press the OK button.

2.Select Connection Setup, then press the OK button.

3.Select Network Setup, then press the OK button.

4.Select TCP/IP Setup, then press the OK button.

5.Select DHCP/BOOTP, then press the OK button to select Off.

6.Select TCP/IP Address, then press the OK button.

7.Enter the printer’s IP address, then press the OK button.

infoSMART Knowledge Base Documents (English only)

For more information, go to www.xerox.com/office/5500infoSMART to view these documents.

Reference Name	Title
R1002033188	Basic TCP/IP Tutorial and Home Networking Guidelines
R1015020333	Installing the Printer Driver in Windows 9x When Using a USB Connection
R1015020339	Installing the Printer Driver in Windows 2000 When Using a USB
	Connection
R1015020349	Installing the Printer Driver in Windows XP When Using a USB Connection
R1015020355	Installing the Printer for a USB Connection in Mac OS 9
R1015020367	Installing the Printer for a USB Connection in Mac OS X 10.3.1 (and later)
R1002018545	Understanding TCP/IP Addressing and Subnetting Basics

Phaser® 5500 Laser Printer

3-8