Xerox 5500 manual Out Of Paper

		Front Panel Messages
Error or Warning Messages (Continued)
Message	Description
Out Of Paper	Load the indicated paper size and type into the indicated
Load Tray [1 (MPT) 2 3 4 5 6]	tray.
with [size*] [type*]
Paper Not Available	Replace the paper in the indicated tray with paper of the
Load Tray [1 (MPT) 2 3 4 5 6]	indicated size and type; or select Print with Available
with [size*] [type*]	Paper to use a paper size and type currently in the printer.
Paper Size Jam	Warning - Use caution, some components inside Door A
Tray [1 (MPT) 2 3 4 5 6]	may be hot.
Check Paper Tray Guides And Open	1.	Confirm that the paper guides in the specified tray are
Door A to Clear Jam
		pressed against the paper.
	2.	Open Door A.
	3.	Remove the jammed paper.
	4.	Close Door A.
Paper Size Jam	Warning - Use caution, some components inside Door A
Tray [1 (MPT) 2 3 4 5 6]	may be hot.
Check Size And Open Door A To	1.	Confirm that the paper guides in the specified tray are
Clear
		pressed against the paper.
	2.	Select Printer Setup, Paper Handling Setup, Tray(n)
		Setup.
	3.	Confirm that the paper size selected in the menu
		matches the paper size loaded in the tray.
	4.	Open Door A.
	5.	Remove the jammed paper.
	6.	Close Door A.
Punch Failure	An error was detected in the Punch. Printing continues
	without punching
	1.	Turn power off.
	2.	Verify Finisher wire harnesses are properly connected
		by unplugging and reconnecting.
	3.	Turn power on
	4.	If error continues, call Service.
Punch Waste Box is Full, Unload It	Remove the contents from the punch waste box to
	continue printing punched jobs. Printing continues without
	punching.
	1.	Open Door G.
	2.	Pull out the punch waste box R4 and discard its
		contents.
	3.	Reinsert the punch waste box.
	4.	Close Door G.
Punch Waste Box is Missing	Reinsert the punch waste box to continue printing
	punched jobs. Printing continues without punching.
	1.	Open Door G.
	2.	Reinsert the punch waste box R4.
	3.	Close Door G.

Phaser® 5500 Laser Printer

4-66