Xerox 5500 manual Front Panel Messages

		Front Panel Messages
Error or Warning Messages (Continued)
Message	Description
Drum Cartridge Is Near End Of Life	The Drum Cartridge is near the end of its life.
	Order replacement P/N 113R00670.
Duplex Unit Failure	An error was detected in the Duplex Unit. Printing
	continues single-sided.
	1.	Turn power off.
	2.	Verify Duplex wire harness is properly connected by
		unplugging and reconnecting.
	3.	Turn power on.
	4.	If error continues, call Service
Duplicate IP address detected	Another device on the network is using the IP address
	assigned to this printer. Change the IP address of the
	printer or the other device.
Exit Unit Failure	An error was detected in the Exit Unit. Printing continues
	single-sided.
	1.	Turn power off.
	2.	Remove and reinstall the Exit Unit.
	3.	Turn power on.
	4.	If error continues, call Service.
Finisher Failure	An error was detected in the Finisher.
	1.	Turn power off. Printing continues using the Standard
		Output Tray.
	2.	Verify Finisher wire harnesses are properly connected
		by unplugging and reconnecting.
	3.	Turn power on.
	4.	If error continues, call Service.
Finisher Logic Board Failure	An error was detected from the Finisher Logic Board
	NVRAM memory. Printing continues using the Standard
	Output Tray.
	1.	Turn power off, then on.
	2.	If error continues, call Service.
Humidity Sensor Failure	An error was detected in the humidity sensor. Print quality
	may be degraded.
	1.	Turn power off, then on.
	2.	If error continues, call Service.
Insert Tray [2 3 4 5 6]	Reinsert the indicated tray to continue printing.

Phaser® 5500 Laser Printer

4-61