Xerox 5500 manual Selecting the Default Tray

Printer Settings

Using the Front Panel

To specify the tray sequence:

1.At the printer’s front panel, select Printer Setup, then press the OK button.

2.Select Paper Handling Setup, then press the OK button.

3.Select Tray Sequence, then press the OK button.

4.Scroll to the desired tray sequence. (If you want to turn off tray switching, select Off.)

5.Press the OK button to save the changes.

Using CentreWare IS

To specify the tray sequence:

1.Launch your web browser.

2.Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.Select Properties.

4.Select the General folder on the left sidebar.

5.Select Printer Defaults.

6.Select the desired tray sequence from the Tray Sequence drop-down list. (If you want to turn off tray switching, select Off.)

7.Click the Save Changes button at the bottom of the screen.

Selecting the Default Tray

If you do not want to use tray switching, you can accept the default order of tray selection. The default tray contains the paper type and size used for printing jobs unless overwritten by a driver selection. When the default tray is empty, or contains a different paper type, you are prompted to load the correct paper type in the tray even if another tray contains the correct paper type and size for the job.

You can select the default tray by two different methods:

■The printer’s front panel

■CentreWare IS

Using the Front Panel

To select a default tray:

1.Select Printer Setup, then press the OK button.

2.Select Paper Handling Setup, then press the OK button.

Phaser® 5500 Laser Printer

1-18