PROBLEM SOLVING
8.Insert the lead edge of the media between the upper and lower feed rollers.
9.Rotate the lower feed roller by hand in order to feed an inch of media between the feed rollers.
10.Press the [Online] Key to take the printer Offline (LED Off).
11.Push in the drawer until it is closed and latched.
12.If the leading edge is not sufficiently square, perform the automatic Initial Cut by pressing the [Select] key to select the appropriate drawer, and then pressing [Cut] key. Approximately 9.5” (240mm) media will be cut and fed from the printer.
13.Press the [Online] key to return the printer Online (LED On).
XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL | 35 |
