USER MODES
User Mode 6 (Detack Lamp Control Mode) “U6”
If the print quality of prints made on Film media lack sharpness or have a light overall appearance, a Detack Lamp in the print process can be switched OFF using Mode 6. This action increases the amount of Toner transferred to the print.
NOTE: If a higher than normal jam rate is experienced, the Detack
Lamp may have to be switched on again.
1.With the printer in the Standby (idle) condition, press the [Menu] Key 6 times to enter Mode 6.
Menu | Enter | Online |
.
Press [Menu] 6 times
Menu | Enter | Online |
Menu | Enter | Online |
Menu | Enter | Online |
The [Menu] Key lights and the display indicates “U6” on the left side of the display and the current setting on the right side.
2.Press [Enter]
3.Press the [ or ] key to change the value to 0 (OFF)
The value in the display will change to 0 (OFF)
The range is 1 – On and 0 - Off
NOTE: Factory default is “0”, Off.
4. Press the [Online] Key to exit the User Mode.
58 | XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL |
