|
|
|
| PROBLEM SOLVING | |
Clearing Media Jam |
|
|
|
|
|
| When a jam | ||||
| Assembly. |
|
|
| |
MF |
| Exit |
|
|
|
|
|
|
|
| |
D1 |
| PF |
|
|
|
D2 |
|
|
|
| |
| Copy Density | Menu | Enter | Online | |
D3 |
| D4 |
|
|
|
| When a jam | ||||
MF |
| Exit |
|
|
|
|
|
|
|
| |
D1 |
| PF |
|
|
|
D2 |
|
|
|
| |
| Copy Density | Menu | Enter | Online | |
D3 |
| D4 |
|
|
|
Fuser | 1. Open the Right Side Door and turn the Inner Transport | ||||
Handle |
| Assembly handle to release the transport. Lower and lock the | |||
|
| transport by engaging the Down Lock. |
|
| |
Cutter | 2. If the media is not cut and the leading edge of the media has | ||||
| reached the Drum or beyond the Drum, rotate the Cutter | ||||
handle |
| ||||
| handle to cut the media. Continue rotating the cutter handle | ||||
|
| ||||
|
| so that the green home position indicator appears in the cut | |||
|
| out. |
|
|
|
Inner Transport handle | 3. | Open the Manual Bypass Shelf, Drawer 1 and Drawer 2 in | |||
Down Lock |
| order to clear the jammed media. |
|
| |
|
|
|
| ||
| 4. If the leading edge of the media has reached the Fuser Unit, | ||||
|
| open the Exit Cover and remove the jammed media by | |||
|
| rotating the Fuser Handle. |
|
|
|
| 5. Release the Down Lock while holding the handle of Inner | ||||
|
| Transport Assembly and lift it up gently until it stops. Then | |||
|
| twist the handle to the left to move the transport to the home | |||
|
| position. Finally, turn the handle to the right to lock the | |||
|
| transport. |
|
|
|
| 6. Rewind the jammed roll until the lead edge of the media | ||||
|
| comes free of the feed rollers. |
|
|
|
XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL | 41 |
