USER MODES
User Mode 5 (Media Cut At Power ON) “U5”
You can enable an Initial Media Cut at Printer Power On. If this feature is enabled, the printer will feed and cut 240mm of all roll media when you switch on the machine.
Menu | Enter | Online |
Press [Menu] 5 times
Menu | Enter | Online |
1.Press the [Menu] Key 5 times when the printer is in the Standby mode.
The [Menu] Key lights green and the Status Display indicates “U5” flashing in the left side of the display. The current setting (0 or 1) is displayed on the right side.
Menu | Enter | Online |
Press [Enter].
2.To change the value, press [
Selectable values are “0” and “1”.
0 is NO initial cut at Power On
1 is an initial cut will be made when the printer is turned On.
NOTE: Factory default is “0”, Off.
Menu | Enter | Online |
3. Press the [Online] Key to exit the User Mode.
XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL | 57 |
