PROBLEM SOLVING
Clearing Media Jam (J-05)
When a jam
Manual Bypass Shelf.
MF | Exit |
|
|
|
|
|
|
| |
D1 | PF |
|
|
|
D2 |
|
|
| |
Copy Density | Menu | Enter | Online | |
D3 | D4 |
|
|
|
Fuser |
Handle |
Cutter |
handle |
Inner Transport handle |
Down Lock |
1.Open the Right Side Door and turn the Inner Transport Assembly handle to release the transport. Lower and lock the transport by engaging the Down Lock.
2.If the media is not cut and the leading edge of the media has reached the Drum or beyond the Drum, rotate the Cutter handle to cut the media. Continue rotating the cutter handle so that the green home position indicator appears in the cut out.
3.If the leading edge of the media has reached the Fuser Unit, open the Exit Cover and remove the jammed media by rotating the Fuser Handle.
4.Release the Down Lock while holding the handle of Inner Transport Assembly and lift it up gently until it stops. Then twist the handle to the left to move the transport to the home position. Finally, turn the handle to the right to lock the transport.
5.Pull to open the top drawer, middle drawer, and Manual Bypass Shelf.
6.Remove any media from the inside of the printer.
7.Close and latch the drawers and Manual Bypass Shelf.
8.Reload the media on the Manual Bypass Shelf, curl side down.
40 | XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL |
