7. | User Modes |
This chapter provides information for the 11 User Modes available on the Xerox Wide Format 721P Printer.
User Mode 1: Test Print
User Mode 2: Date and Time
User Mode 3: Low Power Saver Mode
User Mode 4: High Power Saver Mode
User Mode 5: Media Cut At power on
User Mode 6: Detack Lamp Control Mode
User Mode 7: Attention Beeper Enable
User Mode 8: Custom Setting - Plain Paper
User Mode 9: Custom Setting – Vellum/Tracing Paper
User Mode A: Custom Setting – Film
User Mode b: Image Enhancement
User Mode 1 (Test Print) “U1”
An electronically stored test print can be printed. The pattern of the test print and the width of the test print are preset and cannot be changed
1. To enter User Mode 1:
Menu | Enter | Online |
Press the [Menu] Key once when the printer is in the Standby (idle) Mode. The [Menu] Key lights green and the left side of the Status Display indicates “U1” flashing.
Menu | Enter | Online |
2.The right side of the Status Display indicates the test print status.
-- - (on steady): Test print mode is not available, printer warming 000 (on steady): Test print is available.
000 (flashing): Test print in process
XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL | 49 |
