Selecting & Playing Voices

Combining Two Voices (Dual mode)

You can play two voices simultaneously across the entire range of the keyboard. In this way, you can simulate a melody duet or combine two similar voices to create a thicker sound.

1 2

CLP-370

ENGLISH

Procedure

1. Engage Dual mode.

Press two voice buttons at the same time (or press one voice button while holding another). The voice indicators of both selected voices will light when Dual mode is active.

• According to the voice numbering

Voice numbering priority

 

 

priority shown in the diagram on

1

2

3

4

5

6

7

the right, the lower value voice

 

 

 

 

 

 

 

number will be designated as Voice

 

 

 

 

 

 

 

1 (the other voice will be desig-

 

 

 

 

 

 

 

nated as Voice 2).

 

 

 

 

 

 

 

 

8

9

10

11

12

13

14

The Function mode provides access to a number of other Dual mode functions, such as volume balance setting or octave setting (page 64). (If you do not set Dual mode functions, the appropriate setting will be set in each voice by default.)

2. Exit Dual mode and return to normal play mode.

To return to the normal single-voice play mode, press any single voice button.

NOTE (CLP-370/340)

Dual and Split (page 27) modes cannot be engaged at the same time.

NOTE

[VARIATION] in Dual Mode (CLP-370/340)

The [VARIATION] button’s indicator will light if the variation is engaged for either or both of the

Dual mode voices. While Dual mode is engaged, the [VARIA- TION] button can be used to turn

the variation for both voices on or off. To turn the variation on or off for only one of the voices, hold the voice button for the other voice and press the button of the voice for which you want to change the variation.

NOTE

[REVERB] in Dual Mode

The reverb type assigned to Voice 1 will take priority over the other. (If the reverb is set to OFF, Voice 2 reverb type will be in effect.)

NOTE

[EFFECT] in Dual Mode

Depending on the conditions, one effect type may take priority over the other. Depth will be decided according to the depth default value of the voice combination. However, using function F3 (page

64)you can adjust the depth value for each voice to your liking.

26CLP-370/340/330, CLP-S308/S306 Owner’s Manual