Installing the Optional Floppy Disk Drive (CLP-370/340)

Installing the Optional Floppy Disk Drive (CLP-370/340)

The optional UD-FD01 floppy disk drive can be installed to the bottom of the instrument by using the included floppy disk drive case and screws.

For the CLP-330 and CLP-S308/S306: The disk drive can be used with the instrument but cannot be attached as described here. When using the floppy disk drive with these models, simply put the drive on the top panel. Make sure to remove the connected disk cable before you close the key cover.

Have a Phillips-head (+) screwdriver ready.

1. Remove the three backing papers from the adhesive tape in the case, and fit the floppy disk drive into the case.

Insert the drive to the case, with the side having the rubber stoppers facing the case.

Dual-sided adhesive tape

2. Fold the USB cable inside the case as shown.

3.

4.

Attach the drive and case assembly to the left underside of the instrument, using the included four screws (4mm x 10mm).

Connect the USB cable to the USB [TO DEVICE] terminal.

ENGLISH

CLP-370/340/330, CLP-S308/S306 Owner’s Manual

91