F6. (CLP-370/340) / F5. (CLP-S308/S306, CLP-330)

Metronome Volume

You can change the volume of the metronome sound.

Use this function to adjust the metronome vol- ume.

1.Engage the Function mode and select

(CLP-370/340)/ (CLP-S308/S306, CLP- 330).

2.Use the [–/NO] and [+/YES] buttons to set the metronome volume as required.

Setting range: 1 – 20

Normal setting: 10

NOTE

SHORTCUT:

 

 

You can jump directly to the metronome functions

 

(CLP-370/

 

340)/

 

(CLP-S308/S306, CLP-330) by pressing the [TEMPO/

 

FUNCTION] button while holding the METRONOME [ON/OFF] button. To exit the Function mode, you still need to press the [TEMPO/ FUNCTION] button so that the TEMPO indicator lights up.

Detailed Settings – [FUNCTION]

F7. (CLP-370/340) / F6. (CLP-S308/S306, CLP-330)

MIDI Functions

You can make detailed adjustments to MIDI settings.

For more information about MIDI, see the “About MIDI” section (page 72).

All MIDI settings described below will affect the MIDI signal in and out of the USB [TO HOST] connector.

1. Engage the Function mode and select

 

ENGLISH

(CLP-370/340)/

 

(CLP-S308/S306, CLP-

 

 

 

330).

2. Press the [+/YES] button to engage the MIDI function’s sub-mode, then use the [TEMPO/ FUNCTION ▼, ▲] buttons to select the desired sub-mode.

Press the [–/NO] or [+/YES] button to set a selected parameter.

Sub-mode

(CLP-370/340) (CLP-S308/S306, CLP-330)

MIDI Transmit Channel Selection

In any MIDI control setup, the MIDI channels of the transmitting and receiving equipment must be matched for proper data transfer.

This parameter enables you to specify the channel on which the Clavinova transmits MIDI data.

Setting range: 1 – 16, OFF (not transmitted)

Normal setting: 1

NOTE

In Dual mode, Voice 1 data is transmitted on its specified channel. In Split mode (CLP-370/340), right voice data is transmitted on its specified channel. In Dual mode, Voice 2 data is transmitted on the next greater channel number relative to the specified channel. In Split mode (CLP-370/340), left voice data is transmitted on the next greater channel number relative to the specified channel. In either mode, no data is transmitted if the transmit channel is set to “OFF.”

NOTE

Song data is not transmitted via the MIDI connections. However, channels 3 – 16 of Disklavier Piano Soft songs, and non-protected External songs will be transmitted via the MIDI connections depending on the Song Channel Selection setting (page 66).

CLP-370/340/330, CLP-S308/S306 Owner’s Manual

67