Internet Direct Connection (CLP-370/340, CLP-S308/S306)

Checking the field strength (when using a USB wireless LAN adaptor)

You can check the field strength on the display, if you are using a USB wireless LAN adaptor (Connection example 4 on page 47).

Engage the function mode, then select the function number and enter the desired Submodes Selection mode (refer to steps 1 – 3 for similar instructions on page 49).

Procedure

1. Select Function F9.3 (on the CLP-370/340) or F8.3 (on the CLP-S308/S306).

Use the [TEMPO/FUNCTION ▼, ▲] buttons to select Function F9.3 (CLP-370/

340) or F8.3 (CLP-S308/S306).

2.Press the [–/NO] or [+/YES] button

The field strength indication will appear on the display for about three seconds.

Field Strength Indications

Radio Status

Display

No signal is present.

Field strength: Weak

Field strength: Medium

Field strength: Strong

No wireless LAN is used.

NOTE

The field strength can be displayed after making the Internet connection.

NOTE

If you are using a wireless game adaptor, the display pattern for “No wireless LAN is used” will appear.

ENGLISH

CLP-370/340/330, CLP-S308/S306 Owner’s Manual

51