F4. (CLP-370/340)

Split Mode Functions

This menu enables you to make various detailed settings for Split mode.

By changing the split point or other setting, you can optimize the settings for the songs you play.

1.Select the voices in Split mode, then engage

the Function mode and select .

2.Press the [+/YES] button to engage the Split mode function’s sub-mode, then use the [TEMPO/FUNCTION ▼, ▲] buttons to select the desired sub-mode. Press the [–/NO] [+/ YES] button to assign values.

NOTE

If Split mode is not engaged, will appear instead of and you will be unable to select Split mode functions. Also note that you must exit Function mode before you can engage Split mode.

Sub-mode

Split Point

Setting range: The entire keyboard

Normal setting: F 2

Set the point on the keyboard that separates the right and left-hand sections (split point). The pressed key is included in the left-hand range.

•Instead of pressing the [–/NO] [+/YES] buttons, you can engage the split point by pressing the appropriate key on the keyboard.

•If Function mode is not engaged, you can change the split point to any other key by pressing the key while holding the [SPLIT] button (page 27).

•An example of a key name indication for a split point

 

 

 

 

 

 

 

 

 

(F2)

 

(G2)

 

 

 

 

 

 

 

 

 

 

 

 

 

followed by

 

followed by

a high bar if sharp

a low bar if flat

Split Balance

Setting range: 0 – 20 (A setting of “10” produces an equal balance between the two Split mode voices. Settings below “10” increase the volume of the left voice in relation to the right voice, and settings above “10” increase the volume of the right voice in relation to the left voice.)

Normal setting: Different for each voice combina- tion.

Detailed Settings – [FUNCTION]

The volume level of the two voices combined in Split mode can be adjusted as required. You can make this setting for each combination of voices individually.

Right Voice Octave Shift

Left Voice Octave Shift

Setting range:

–1, 0, 1

 

Normal setting: Different for each voice combination

 

You can shift the pitch up and down in octave steps for

 

the Right Voice and Left Voice independently. Make a

 

setting depending on the note range of the songs you

 

play. You can make this setting for each combination of

 

 

voices individually.

 

 

 

ENGLISH

 

Right Voice Effect Depth

 

 

 

 

 

 

 

 

Left Voice Effect Depth

 

 

 

 

 

 

 

Setting range:

0 – 20

 

 

 

 

 

 

 

Normal setting: Different for each voice combination These functions make it possible to individually set the depth of the effect for the left and right Split mode voices.

The effect depth settings cannot be changed unless the [EFFECT] is ON. You must exit Function mode before you can turn on an [EFFECT].

You can make this setting for each combination of voices individually.

Damper Pedal Range

Setting range: ALL (for both voices) 1 (for the right Voice) 2 (for the left Voice)

Normal setting: ALL

The Damper Pedal Range function determines whether the damper pedal affects the right voice, the left voice, or both the left and right voices in Split mode.

Reset

This function resets all Split mode functions to their default values. Press the [+/YES] button to reset the val- ues.

NOTE

SHORTCUT:

You can jump directly to Split mode functions by pressing the [TEMPO/FUNCTION] button while holding the [SPLIT] button.

To exit Function mode, you still need to press the [TEMPO/FUNC- TION] button so that the TEMPO indicator lights up.

CLP-370/340/330, CLP-S308/S306 Owner’s Manual

65