Recording Your Performance

Changing the Initial Settings (Data recorded at the beginning of a song)

The initial settings (data recorded at the beginning of a song) can be changed after the recording. For example, after recording, you can change the voice to create a different ambience or adjust the song tempo to your taste.

You can change the following initial settings.

Individual Parts

•Voice selection

•[VARIATION] ON/OFF (CLP-370/340)

•[REVERB] depth

•[EFFECT] depth

•Dual mode voices

•Split mode voices (CLP-370/340)

•Damper/soft pedal depth

Entire Song

•Tempo

•[REVERB] type (including OFF)

•[EFFECT] type (including OFF)

1.Change the settings via the panel controls.

For example, if you wish to change the recorded voice from [E. PIANO 1] to

[E. PIANO 2], press the [E. PIANO 2] button.

2.Engage Record mode and select a part to change the initial settings.

The indicator glows red. (Data shared by two parts can be changed via either part.)

CAUTION

Be careful not to press the SONG [PLAY/PAUSE] button or a key on the keyboard, either of which will start recording and erase all previously-recorded data on the selected part.

3. Press the [REC] button to exit Record mode.

ENGLISH

CLP-370/340/330, CLP-S308/S306 Owner’s Manual

35