Internet Direct Connection
Exporting the Connection Information
This procedure lets you export the detailed information on the current connection as a text file to a USB flash memory device. You can check the information on your com- puter.
Engage the function mode, then select the function number and enter the desired Submodes Selection mode (refer to steps 1 – 3 for similar instructions on page 49).
Procedure
ENGLISH | 1. Select Function F9.2 (on the |
| |
| (on the |
Use the [TEMPO/FUNCTION ▼, ▲] buttons to select Function F9.2
340) or F8.2
2.Turn on the Export mode.
Press the [+/YES] buttons so that “OUt” appears on the display.
If you do not want to export the file, press the
3. Start exporting.
Press the [+/YES] button.
A “n y” appears in the display to confirm whether you wish to export the file or not, press the [+/YES] button again.
If you do not want to export the file, press the
A
Press the [+/YES] button to execute the overwriting operation. Press the
When exporting to the USB flash memory device is
completed, an “End” message will appear on the dis- play. Press
After exporting, connect the USB flash memory device to your computer, and then open the text file named “ConnectionInfo.txt” in the root directory of the USB flash memory device to check the detailed connection information.
NOTE
The connection information file does not allow you to manually make Internet settings. The connection information file is set to “read only” and cannot be edited.
NOTE
The export mode cannot be engaged while voice demo song
playback is in use, when the [REC] button is on, or when user
song playback is active.
NOTE
If exporting has not successfully been completed, an “Err” message and the error code will appear alternately on the display.
NOTE
Error Code
You can check the description for the error code on the Yamaha website: http://music.yamaha.com/idc/
52